Tactile surface warning studs from stainless steel AISI-LINE

Tactile surface warning studs from stainless steel Individual tactile surface warning studs /tactile warning strips/ in shape of a truncated cone are made of stainless steel and ensure long lasting stable performance. They are designed to alert and inform blind and visually impaired people about imminent danger, or provide them with directional instructions. According to the law against discrimination of blind and visually impaired people it is required to ensure tactile warning studs – by creating a warning strip on stairways, ramps, escalators, platforms and in all places that are described in the standard.
  • tactile surface warning strip - consists of a design of studs of hemispherical shape with a possible structure in diagonal or radial arrangement 
  • tactile warning strip draws attention to the location of devices, potential hazards or direction changes 
  • individual tactile surface warning studs are ideal for retrofitting
  • individual tactile warning studs allow to display the floor of the area between individual tactile warning studs/ are ideal for an architecturally excellent design
  • location and distribution of tactile warning studs / tactile warning strips / in accordance with the applicable standard of a country 
  • fast and easy installation with help of a template
  • are suitable for application to interior and exterior
  • stainless steel material
AISI/KD

AISI/KD

AISI-LINE
 
Individual tactile surface warning studs in shape of a truncated cone are made of stainless steel and ensure long lasting stable performance.
PRODUCT DESCRTIPTION
 
Individual tactile surface warning studs in shape of a truncated cone are made of stainless steel and ensure long lasting stable performance.
They are also characterized by: good resistance to corrosion, abrasion, excellent resistance to weathering, ozone, sunlight and oxidation.
Strips and studs are made with pins and without pins in a variety of designs with a possible plastic insert inserted into the product.
The system has already proved good in train stations, banks, universities, entrance areas, et

 
PRODUCT FEATURES
  • Minimal impact on staff/pedestrians during installation
  • Quick and easy installation using a template on all surfaces, including concrete, ceramic tiles, asphalt, wood floors and      
    most other surfaces
  • Embossed anti-slip surface, safe and non-slip
  • Long-lasting product performance, impact resistant
  • Low maintenance demands
  • Walking possible immediately after installation, by full load after 24 hours
  • They are modular and their universality allows endless configurations to adapt to new or existing surfaces and styles   
    of design
  • AISI-lines have a height of 3.5 and 5 mm, which ensures that there will be never any danger on the road
  • Stainless steel ensures stability and durability of the product indoors and outdoors
  • AISI-LINE offers the specifiers the possibility to maintain the aesthetics of the substrate without limitation of tactile    
    performance

 
LUMINANCE CONTRAST
 
In line with international and European standards the luminance contrast between the tactile surface warning studs and the surrounding substrate must be minimum 30%. AISI-LINE is available in a variety of colour inserts that allow specifiers to choose the most appropriate contrast values for a given installation.
 
Individual tactile surface warning studs are available in a number of standard and the most commonly used colours.
 



Customers can also request a custom colour  (with respect to the minimum amount) in order to make the tactile studs and strips fit into any design, style and colour scheme.


PURPOSE OF USE

The tactile surface warning stud with a design of hemispherical projections in a colour contrasting with the colour of the surrounding surface and functional arrangement of hemispherical projections on the ground, that are recognizable by legs and white stick and can be also detected visually, are designed to alert and inform blind and partially sighted people about danger, provide directional guidance (change of direction) and information.
 
1.Structure of the warning strip in diagonal                                                2.Structure of the warning strip in radial
   arrangement                                                                                                     arrangement

 
 
 
 
 
 



Individual surface tactile warning studs fit harmoniously into the existing architecture and break the concept in an attractive way.
 
 
APPLICATIONS

Versatile and flexible
Enormous variability and flexibility of individual tactile surface warning studs means that they can be easily fitted into almost any construction without limitation of creative design and architecture. Whether used in new or old constructions, they work exactly the same way

According to the law
against discrimination of the blind and visually impaired, it is required to ensure the placement of tactile surface warning studs in internal and external areas open to the public.

Individual tactile surface warning studs are placed on the top and bottom of each arm of the stairs, on ramps in front of escalators, on each side of pedestrian crossings, along platforms of public transport (such as bus stops, train platforms, subway...), sea and river transport and in all areas, which are described in the decree of the country.

Tactile surface warning studs are installed on any surface such as: wood, marble, granite, asphalt, concrete, tile, PVC materials and other substrates, with widths according to the decree of the country.


 
Code of the product Diameter
/ mm /
Height
/ mm /
Product
Material
   
AISI/KD-K/35/5 35 5 with pin stainless steel Order
AISI/KD/35/5 35 5 without pin stainless steel Order
 
 
olejartactile.com | All rights reserved.
olejartactile.com | ITcity s.r.o. - IS for ITcity generated by Comein.sk